Dyson Airblade Wash+Dry short hand dryer
Airblade™ hand drying technology in a tap. 3 models available.
• 14 second dry time1
• Hygienic performance with HEPA filter
• 76% less expensive to run than other hand dryers2
• 5-year guarantee3
Proven hygienic by independent testing
All Dyson Airblade™ hand dryers undergo rigorous testing by Dyson. The impact of drying hands has been tested in universities and published in international journals.
Wash and dry hands at the sink. The Dyson Airblade Wash+Dry hand dryer automatically switches between water and air, there's no need to touch taps or buttons.
Fast. And energy-friendly.
Using Airblade™ technology, sheets of high-velocity air quickly scrape water from hands. Drying hands in just 14 seconds1 without needing energy-hungry heating.
Clean air from the HEPA filter is forced at 549km/h through apertures 0.55mm wide, scraping water from hands, quickly and hygienically.
Dries hands at 549km/h with the Dyson digital motor V4
The Dyson digital motor V4 uses digital pulse technology to spin at up to 81,000rpm – three times faster than a conventional motor. So it can draw up to 21 litres of air per second through the machine.
The HEPA filter captures 99.95% of particles up to 0.1 microns4, including bacteria and viruses5 from the washroom air, before it's blown on to hands.
Have cleaner washrooms
With Airblade™ technology in a tap, there's no need for users to move to a separate drying area, so no water is dripped on the floor. And with the space saving Dyson Airblade Wash+Dry hand dryer, there's room for extra toilet cubicles and other facilities.
Dry hands. In just 14 seconds
The Dyson Airblade Wash+Dry hand dryer takes just 14 seconds1 to dry hands. So users spend less time in your washrooms, making busy times easier to manage.
Up to 69% less expensive to run than other hand dryers.Up to 94% less than single-use paper towels,2 with up to 79% less CO2.6 Creating a better environment in your washrooms and in the world outside.
The only hand dryer certified for use in food preparation environments, by the HACCP International standards.
All Dyson Airblade™ hand dryers are certified by the Carbon Trust.
HEPA filter as standard
Dyson digital motor - V4 brushless DC motor
Exterior screw type
Operation lock-out period
Motor switching rate
5,400 per second
Captures 99.95% of particles the size of bacteria
Up to 81,000rpm
Standby power consumption
Less than 0.5w
Choose your model
Dyson Airblade Wash+Dry hand dryers
Dyson Airblade™ Wash+Dry short
Airblade™ hand drying technology in a tap
• Dimensions: H 159 x L 286 x W 303 mm
Explore the Dyson Airblade™ hand dryer range
2 Average electricity price HK$ 1.3/kWh as of December 2018. For calculations visit www.dyson.hk/calcs
3 Refers to owner's manual for specific warranty terms and conditions.
4 HEPA filter tested to EN1822-5, by an independent testing laboratory, under prescribed test conditions. Test Report Number: 16587A/16495A/18959B
5 Tested by an independent laboratory, under prescribed test conditions, using the bacteria Brevundimonas diminuta and the virus MS-2 coliphage.
6 The environmental impact of electrical appliances and paper towels was measured by Carbon Trust. The calculations were produced using the software Footprint Expert Pro, based on product use over 5 years and using weighted averages of individual countries of use. Dry times for product were evaluated using DTM 769.